ONEUP COMPONENTS DROPPER LEVER V2 22.2

The OneUp Dropper Post Remote V2, constructed from aluminum and equipped with an oversized bearing, delivers an exceptionally smooth action. Its distinctive lever position enables you to maintain a firm grip on the handlebars while effortlessly actuating your seat post. Feel confident dropping your post, even in challenging technical sections.

The OneUp lever ingeniously mimics the inboard upshift paddle position of your right-hand shifter, departing from the typical downshift paddle position found in most remotes. This unique position significantly reduces thumb movement, enhancing control. With a cable setup that requires no bleeding, the installation process is quick and straightforward. The cable conveniently clamps at the lever, allowing easy adjustment of housing length for clean routing.

In addition to its hydraulic-free design eliminating temperature sensitivity, the OneUp Dropper Post Remote V2 ensures reliability. In the event of remote damage, you can still lower or extend your post by removing it from your frame and manually pushing on the actuator.

Key Features:

• A superior remote for any cable-operated dropper.
• Quick and easy setup without the need for bleeding.
• Kit includes cable and housing.
• Compatible with all cable actuated dropper posts.

Installation Instructions: 22.2mm Clamp:

1. Loosely attach the hinged clamp to your handlebar (Left side of brake for SRAM, Right side of brake for Shimano).
2. Attach the remote body to the clamp using your preferred mounting hole.
3. Torque the remote body to the clamp using a 3mm hex to 3Nm.
4. Loosen the 22.2mm clamp and rotate the OneUp dropper remote until the remote body is parallel to the brake lever.
5. Snug the 22.2mm clamp to 1Nm max.

Shimano I-Spec II (M9000, M8000, M6000 etc):

1. Remove the lever mounting bolt completely from the left brake using a 4mm hex.
2. Depress the "Push to Open" button using a 2mm hex to fully open the brake lever clamp.
3. Remove the plastic spacer from the inside of the lever clamp.
4. Install the OneUp I-spec II adapter into the lever clamp.
5. Loosely reinstall the brake lever clamp onto the handlebar.
6. Attach the remote body to the I-spec II adapter using your preferred mounting hole.
7. Torque the remote body to the I-spec II adapter using a 3mm hex to 3Nm.
8. Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.
9. Torque the brake lever clamp to the manufacturer's recommendation.

Shimano I-Spec EV (12 speed XTR M9100, XT M8100, SLX M7100 only):

1. Remove the lever mounting bolt completely from the left brake using a 4mm hex.
2. Depress the "Push to Open" button using a 2mm hex to fully open the brake lever clamp.
3. Install the OneUp supplied T-nut into the curved recess on the hinged clamp.
4. Reinstall the brake lever clamp onto the handlebar.
5. Install the OneUp supplied IS-EV adapter onto the T-nut.
6. Attach the remote body to the IS-EV adapter using your preferred mounting hole.
7. Torque the remote body to the IS-EV adapter using a 4mm hex to 3Nm.
8. Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.
9. Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.

SRAM Matchmaker X:

1. Remove Brake lever mounting screw and hinged clamp using a T25 Torx.
2. Install the OneUp supplied T-nut into the curved recess on the hinged clamp.
3. Reinstall the brake lever clamp onto the handlebar.
4. Install the OneUp supplied Matchmaker X adapter onto the T-nut.
5. Attach the remote body to the Matchmaker X adapter using your preferred mounting hole.
6. Torque the remote body to the Matchmaker X adapter using a 3mm hex to 3Nm.
7. Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.
8. Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.

Disclaimer: Our efforts are focused on presenting accurate and up-to-date descriptions, specifications, and images of our products. However, we cannot guarantee absolute correctness. If you have any uncertainties or require confirmation regarding specific features or specifications important to you, feel free to contact us.